Honda Motorcycle Philippines

New Motorcycle

Yamaha Motorcycle

Ducati 848 Nicky Hayden Special Edition announced

Ducati North America have produced a Ducati 848 Nicky Hayden Special Edition which will be sold exclusively in the United States.


Ride safe.


Jon Booth
Email:
Blog: http://motorcycleandmotorcycle.blogspot.com/
Swicki:

Honda's first factory produced chopper (VT1300CX) comes to the UK

Honda (UK) Motorcycles have announced that their first factory produced chopper the VT1300CX will be coming to the UK in 2010. This Honda chopper is powered by a 1312cc 52-degree fuel-injected V-twin found in the popular VTX1300 machine, but with a re-profiled camshafts and a new exhaust system. Apparently the single-pin crank gives the bike a unique sound which growls through the machine’s twin stacked pipes.

The radiators for the liquid-cooled machine are tucked out of sight for a more ‘traditional’ look. It has a new programmed fuel injection system, further contributing to the impressively low fuel consumption of 56.5mpg*

The VT1300CX will be available in two colours – the striking glint blue wave metallic or graphite black.

Ride safe.


Jon Booth
Email:
Blog: http://motorcycleandmotorcycle.blogspot.com/
Swicki:

Buell 1125RR released (race use only!)

Buell have produced the 1125RR version of their 1125 sports bike to give privateer racers a turn-key machine to compete in the American Superbike class in AMA Pro Racing.

The Buell 1125RR has a modified Helicon 1125cc (103mm bore x 67.5mm stroke) liquid-cooled 72-degree V-Twin engine. Power increases come from various components including a larger airbox and intake manifold, revised valves and camshafts, a higher compression ratio, titanium exhaust system and other weight-reduced components.

Ride safe.


Jon Booth
Email:
Blog: http://motorcycleandmotorcycle.blogspot.com/
Swicki:

Mini Bike Mania

For kids, this time of year used to mean dreaming of a Mini Bike for Christmas.

In 1969, I wanted and got a Taco for Xmas but, I had to pay for most of it. It was a 44 like the one in the upper right.

The traditional Mini Bikes of the sixties and early seventies were the original outlaw machines that got a lot of us started on bikes and as gearheads.

Vava-voom! What adolescent male wouldn't get revved up? Former playmate of the year June Cochran (1963), on a Rupp. Later, June joined Linda Vaughn as one of the Hurstettes. June died May 21, 2004. Getting old sucks!

I only like lawnmower engine powered small wheeled minis, not mini motorcycles. I also don't care for most of today's mini choppers. Most are too big, ugly and stupid.

Damn. I use to have this and a few other Mini Bike Guides


Choppers, Trikes, and Minis were big then. What kid in the 60-70's wouldn't go ape for this rig? I did.

I still love'm. Recently, I've collected several Tacos and a couple others that need to be restored.

I'll post more mini bike stuff later.

WOODEN 125cc VESPA

Arborists, lovers of wood, craftspeople, and aesthetes have always hankered for more Wood in their vehicles - witness the number of cars and motorcycles which have incorporated a bit of cellulose fiber into the structure or body of their products.
Morgan cars come to mind immediately, as they are yet producing hand-made voiturettes with oak chassis beams to this day, following a very long tradition within the company.In the 1920's it was not uncommon to incorporate a bit of hardwood into motorcycle frame spars, not for any conceivable necessity, as it would be hard to justify filling a highly-stressed application with a material prone to cracking, rot, attack by critters, mildew, and of course, catching fire, a not uncommon occurence with open carburettor bellmouths, tickled floats, and ignition kickback! The reasoning, well, more likely the passion for using wood thus sprang from a deep love for the look and feel of an aged beam, rubbed and polished to bring out the figuration and luster.

It's a passion I share, being a sometime restorer of wooden panelling and bannisters, and I frankly go weak in the knees when I see a tasteful bit of mahogany planking on the deck of a 'Launch' sidecar from the 1930's.



The builder of this wooden Vespa, Carlos Alberto of Portugal, obviously has an abiding love of and skill with the material as well - a few spots of home-layered ply are incorporated for strength, but much of the body is solid boarding, steamed, shaped, carved, sanded, and finessed into shape. Alberto purchased a rotted ca. 1948-53 125cc model, which used a headlamp mounted on the front mudguard, and set about remaking the machine in the materials of his trade.



'Color' has been added by the use of different woods; I would speculate mahogany, oak, and ash as primary ingredients; the effect is very Mod, reminiscent of Paul Smith's signature pinstripes. It's a master -work, and it runs - remarkable..

Women on Motorcycles - Best Pictures for 2005-2006

The Women on Motorcycles gallery displays pictures of women riders and their motorcycles. This gallery has proved an inspiration for many women thinking about learning to ride a motorcycle.

When women see women riders from all walks of life enjoying the sport and recommending it to other women, they often are engendered with the spirit to give motorcycling a try.

The top women on motorcycles pictures were picked from pictures submitted in 2005-2006. Women were chosen for a variety of reasons. I looked at each picture, read each description, and picked those pictures that held my interest. There's a mix of women and motorcycles here that should give you an understanding of how deep the motorcycling experience is for women these days. Check out Women on Motorcycles - Best Pics for 2005-2006.

If you're a woman thinking about riding, be sure to also view our current Women on Motorcycles Gallery for inspiring testimonials from women riders and to see how diverse the population of women riders is.

Harley-Davidson Guarantees Sportster Trade-in Value

Even in these tough economic times, Harley-Davidson has found a way to lure more customers into their showroom: Allow trade-ins at the original sale price.

Harley has a plan to allow their customers who have already purchased a recent Sportster to trade it in on a larger model but essentially cancel the depreciation on the Sportster. Here's an excerpt from an article by Rick Barrett of the Milwaukee Journal Sentinel:

"Harley-Davidson Inc. (HOG) has announced a new motorcycle purchase program that guarantees the trade-in value of a Sportster when traded for one of the company's more expensive bikes. Harley riders who either buy a new Sportster or trade in their recently purchased Sportster between Dec. 26 and March 31 will get the bike's original manufacturer's suggested retail price when they trade up to one of Harley's Big Twin or VRSC motorcycles." -- Rick Barrett, Milwaukee, Wisconsin Journal Sentinel

Read the complete story.

THE RUDGE BOOK OF THE ROAD

In 1925 through 1927, the Rudge-Whitworth company introduced a line of touring accessories which have never been equaled by any other motorcycle manufacturer, even in these days of super-luxo three-wheel touring rigs with 1600cc flat-six engines, stereos, and GPS.

Specifically, Rudge introduced a full touring caravan, complete with dining table and beds, which could be towed behind one of their '4-valve, 4-speed' models. Added to this, one could order a sidecar chassis carrying a quick-detachable canoe! This was no 'miniature' boat, as some manufacturers produced in the 1950's for sidecar haulage; the Rudge canoe was fully 14 feet long. Yet, the company advertised that the "Canoe sidecar can be turned round in a circle of 20 feet diameter, which very few motor cars are capable of doing. To river lovers it gives great mobility and makes it possible to become acquainted with half the rivers in the country."

To demonstrate the soundness of the whole combination (with the canoe, at least), Rudge Managing Director John Pugh arranged for G.E. 'Ernie' Nott, factory tester and racer, to enter such an outfit in the Birmingham Motorcycle Club's 'Victory Trial' on March 7, 1925 (see photo below). Nott looked to be a tough character, with a nose like a prize fighter, and was certainly accustomed to the pounding of Brookland's pavement. And yet, Nott won a Bronze medal in the Trial, with a little help from other Rudge team members on the really tight bits. The three fellow teamsters rode solo Rudges, and won a Gold and two Silvers as well, but clearly had time to help "manhandle the outfit sufficiently for him [Nott] to negotiate the more difficult parts of the course" [The Story of Rudge, Hartley, 1985]. Not many trials course allow for a twenty foot turning radius!

Remarkably the Canoe was offered with either the 350cc ('10hp' - £58) or 500cc ('15hp' - £64.6) capacity machine, with Electric Lighting Set via an ML 'Maglita' an extra £5. The photo above is from Dave the Photo Pyrate, who marvels that 'an archive sent me pictures!'. Dave used to work for Salter Brothers of Folly Bridge, Oxford, who sent him this photo of Rudge and Canoe sidecar from their files. It is possibly the very same canoe used in the Trial, shown at the Works before delivery to Rudge-Whitworth. As far as I know, this photograph has never been published, and is the best shot ever of the canoe itself, from the archives of the manufacturer, Salter Bros. The construction of the boat is clear, with steam-bent ribs and mahogany planking, held together with brass nails, and varnished to a high gloss. According to Dave, the company is still manufacturing wooden 'Canadian' canoes such as this, along with its other products. Thus, if one is so inclined, a brand-new Rudge canoe might be arranged with the original manufacturer! Food for thought... I'm a huge fan of the things.

Dave also sent this delightful photo of the Canoe outfit; captain at the helm appears to be Ernie Nott, in far less arduous circumstances than the Victory trial, chauffering two Flappers to an open-water picnic. Love their cloche hats and the Chinese paper parasol, although I reckon they might be a bit chilled in their thin silk dresses. Ernie is taking no chances, and wearing a hearty Mackintosh! He looks well amused by the scenario, in any case. Note the thick canvas webbing which secures the canoe to the sidecar frame - the same system as on the Salter Bros. outfit. I think we can confidently assume that these canoes are one and the same, given the overall shape of the boat and construction details... this is perhaps the ONLY Rudge canoe built, as there is some doubt whether any were actually sold.



The Rudge Caravan was introduced for the 1927 model range, further exploring this uncharted territory for touring motorcycles. A complete outfit was offered, with Rudge 500cc ohv motorcycle and 'Semi-Sports' sidecar, plus the trailer, for £136.50. The Caravan itself was 7'3" (2.23m) long 4'10" (1.5m) wide, and 4'7" (1.4m) high. Inside were two small beds, a table, storage lockers, etc. Weight of the caravan was 285lbs, about the same as the solo motorcycle. It was recommended that cooking and washing occur outside of the trailer - cooking especially due to fire danger. A commercial version of the trailer was available, and were in use as late as 1944 delivering milk by the Coventry Co-op.

When parked, the owner's manual recommeded the outfit's tow-bar to be 'lashed to the nearest hedge, and the rear corners fitted with ropes and pegged down', with attention paid to the prevailing winds and likely course of the sun throughout the day.

The all-up weight with motorcycle, sidecar, Caravan, rider, and any gear included must have exceeded 1000lbs, on a motorcycle still relying on 'dummy rim' external-shoe brakes, front and rear. Rudge was a pioneer in linked braking systems,ie the front brake was activated along with the rear when the brake pedal was depressed, and with the Caravan, two further brakes on the trailer wheels were activated as well. Yet the 'dummy rim' brakes used during those years by Rudge are marginal in normal use, very dodgy when wet, and impossible under a half-ton of load.

Anent this, a humorous story is included in Reynolds' 'Don't Trudge It, Rudge It' (Haynes, '77); "Tyrell Smith was riding the [outfit with trailer] and together they were cruising at about 40mph when a constable stepped out from the side of the road to halt them. Tyrell hit the brakes hard but there was no chance of stopping the outfit in a hurry and it sailed on past the policemen and eventually stopped 100 yards further down the road. Seeing the problem, Ernie Nott [who was riding a spare racing bike behind Smith] pulled up beside the policeman to show that he interpreted the signal to apply to him. The policeman was not so readily convinced and he set off down the road, after the oufit, to accuse the rider of having no brakes. When the officer tried the time honoured method of testing the brakes, by pushing the oufit with the brakes applied, he couldn't move it an inch, which is not surprising considering the weight it was carrying. He therefore let the riders go with a warning about being a bit more observant in the future. It was a good thing that he knew nothing of the effect of inertia!"

In 1927, Rudge-Whitworth published the 'Rudge Book of the Road', which explains in detail their philosophy of touring, camping, and competing on your Rudge motorcycle. This book is a gem, and quite a few copies are still floating around. If you're a fan of 1920's vernacular writing, this little 150 page booklet tickles the reader with an optimistic yes-you-can! style, and is illustrated with adorable Art Deco end pages and illustrations, as well as photographs of Rudges in action, weather advice with cloud identification, maintenance tips, mileage charts, a spot of Latin tutoring, and a full 25-page atlas of Britain at the back. It is achingly good reading for a nostalgist; you'll want to find the nearest Rudge dealer - today! - and go explore the halcyon lanes of a world gone by.